Estimation of the 3D correlation structure of an alluvial aquifer from surface-based multi-frequency ground-penetrating radar reflection data     

Zhiwei Xu  James Irving  Kyle Lindsay  John Bradford  Peimin Zhu  Klaus Holliger 《Geophysical Prospecting》2020,68(2):678-689

Knowledge about the stochastic nature of heterogeneity in subsurface hydraulic properties is critical for aquifer characterization and the corresponding prediction of groundwater flow and contaminant transport. Whereas the vertical correlation structure of the heterogeneity is often well constrained by borehole information, the lateral correlation structure is generally unknown because the spacing between boreholes is too large to allow for its meaningful inference. There is, however, evidence to suggest that information on the lateral correlation structure may be extracted from the correlation statistics of the subsurface reflectivity structure imaged by surface-based ground-penetrating radar measurements. To date, case studies involving this approach have been limited to 2D profiles acquired at a single antenna centre frequency in areas with limited complementary information. As a result, the practical reliability of this methodology has been difficult to assess. Here, we extend previous work to 3D and consider reflection ground-penetrating radar data acquired using two antenna centre frequencies at the extensively explored and well-constrained Boise Hydrogeophysical Research Site. We find that the results obtained using the two ground-penetrating radar frequencies are consistent with each other, as well as with information from a number of other studies at the Boise Hydrogeophysical Research Site. In addition, contrary to previous 2D work, our results indicate that the surface-based reflection ground-penetrating radar data are not only sensitive to the aspect ratio of the underlying heterogeneity, but also, albeit to a lesser extent, to the so-called Hurst number, which is a key parameter characterizing the local variability of the fine-scale structure.  相似文献   

Early Identification of the Jiangdingya Landslide of Zhouqu Based on SBAS-InSAR Technology   总被引：1，自引：1，他引：0  

YU Haihu  CAI Guolin  GAN Quan  SHEN Dong 《中国地震研究》2020,34(4):510-522

SBAS-InSAR technology is characterized by the advantages of reducing the influence of terrain-simulation error, time-space decorrelation, atmospheric error, thereby improving the reliability of surface-deformation monitoring. This paper studies the early landslide identification method based on SBAS-InSAR technology. Selecting the Jiangdingya landslide area in Zhouqu County, Gansu Province as the research area, 84 ascending-orbit Sentinel-1A SAR images from 2015 to 2019 are collected. In addition, using SBAS-InSAR technology, the rate and time-series results of surface deformation of the landslide area in Jiangdingya during this period are extracted, and potential landslides are identified. The results show that the early landslide identification method based on SBAS-InSAR technology is highly feasible and is a better tool for identifying potential landslides in large areas.  相似文献   

基于点云数据的不规则文物三维重建——以经幢为例     

喜文飞  李灵索  杨勇  李国柱  李春梅  李金平 《测绘通报》2020,(12):87-89

海量点云数据可以较好地构建文物的三维建模，针对文物复杂的表面结构，传统的算法很难达到精细建模，为了解决复杂模型表面的空间三角网构网问题，本文结合空间三角形的法向量构建三角网，以空间三角网表面的曲率为约束条件，构建物体表面的空间三角网，然后对构建的空间三角网进行精细建模。以昆明市文物——经幢为例进行三维重建试验，结果表明，新方法适合室内文物的三维建模，可以达到较好的效果。  相似文献   

融合多源数据的三维建模方法及精度分析     

祖立辉 《北京测绘》2020,(3):347-351

以地面相机影像、低空无人机影像和地面三维激光点云数据为融合对象,研究空地影像融合、低空影像融合地面三维激光点云和低空影像融合三维白模进行三维建模的方法,并对其三维建模精度和建模效果进行综合分析。这3种融合方法进行三维建模丰富了三维模型的色彩纹理信息,提高了三维模型的几何结构精度,能满足较大场景的三维实景模型的建模要求,为数字化古建筑(古文物)保护提供具有较高价值的参考数据。  相似文献   

基于TerrSolid对机载雷达DEM重提取方法研究     

王瑚  周光耀  周海龙 《测绘与空间地理信息》2020,(3):127-130

DEM的提取是激光雷达数据采集的重要用途之一,但由于目前算法的局限性,无法高精度地自动分类,如何在算法分类的基础上重新进行人工分类,以一定的原则和标准进行重提取从而得到更高精度的DEM,仍然是专业领域的一大难题。本文对某.LAS数据重提取,极大提高了其DEM的精度,为今后相关单位和个人使用TerrSolid软件对机载雷达DEM重提取提供一些经验。  相似文献   

两株南极枝孢霉属真菌Cladosporium sp.NJF4和NJF6的次级代谢产物研究          下载免费PDF全文

常俊男  田晓清  樊成奇  黄金昌  陆亚男  韩清华 《极地研究》2020,32(1):60-67

南极因其独特的自然环境成为潜在、重要的微生物资源库,是产生新型生物活性物质和先导化合物菌株的潜在种源地,南极微生物正在成为创新药物研究新的重要资源。虽然近年来对南极微生物次级代谢产物的研究逐渐增加,但与温带和热带微生物研究相比仍处于初级阶段。对从南极普里兹湾海洋沉积物中获得的两株枝孢霉属真菌Cladosporium sp. NJF4和NJF6进行次级代谢产物分离及结构鉴定,获得20个化合物。化合物结构类型包括甾醇(1)、倍半萜类(7—8)、生物碱类(9—14)、二酮哌嗪(2—5、15—17)、芳香酸(6、18—19)等,其中倍半萜类(7—8)为首次从枝孢霉属真菌中分离得到,以上研究将为丰富南极微生物次级代谢产物库奠定一定的研究基础。  相似文献   

Jason-2高度计电离层GIM误差分析及修正研究     

黄霞凤  苗洪利  苗翔鹰  薛文文 《海洋学报》2019,41(7):143-148

基于Jason-2高度计2015年地球物理数据集(GDR)38个周期太平洋海域的全球电离层图(GIM)电离层校正值和双频校正值的数据，分不同季度和不同纬度区域比较二者的差异，结果表明:GIM值与双频校正值之间存在明显的差异，GIM校正值普遍高于双频校正值，说明GIM高估了电离层路径延迟，GIM校正值与双频校正值的差异与季节和纬度区间有关。用梯度下降法得到GIM值的修正方程，将修正方程应用于2016年Jason-2的全年数据，修正后的GIM值与双频校正值十分接近，在各年份中均具有良好的适用性。在单频高度计不能使用电离层双频校正算法的情况下，可以利用不同季度和不同纬度区域的修正方程对同等高度的高度计GIM值进行修正以达到双频校正值的精度水平。  相似文献   

井间电磁法综述     

刘四新  倪建福 《地球物理学进展》2020,(1):153-165

地面电磁法在实际工作中在很大程度上受到了探测深度和分辨率的限制.为了克服这些缺点,出现了井间电磁法.井间电磁法指的是在两个(或多个)钻孔中分别发射或接收电磁波信号,利用电磁波信号进行成像并探测井间物理性质的地球物理方法.由于发射机和接收机可以分别放置在很深钻孔中,其具有大透距、大探测深度的特点,因而广泛应用于工程环境物探、矿产勘查、石油勘探等中.针对不同的应用,产生了各具特点的一些特殊方法,包括井间无线电波成像、跨孔雷达、井间电磁成像.井间无线电波成像仪目前只测量电场强度数据,工作频率低,一般是单频的电磁波,频率范围通常在1 kHz至10 MHz.由于缺少走时数据修正射线路径,井间无线电波成像主要是进行基于直射线追踪的衰减层析成像.井间无线电波成像既可用于工程与环境地球物理也可用于找矿.跨孔雷达是钻孔雷达的一种探测方式,用高频电磁脉冲探测两个井孔间介电常数和电导率的变化.跨孔雷达层析成像也叫地质雷达CT,既可进行走时成像,还可进行衰减成像.一般来说,地质雷达CT的电磁波工作频率较高,中心频率通常在10 MHz和1 GHz之间,因此在分辨率指标上占有优势,跨孔雷达主要用于工程与环境地球物理.井间电磁成像采用更低的频率,测量复电磁信号,适合油气储集层监测,是一种地球物理前沿技术.经过在多个试验区初步试验表明,井间电磁成像是油藏研究的有效手段,可用于分析剩余油分布,寻找油气富集区,进而达到提高钻探高效井成功率和提高采收率的目的.本文详细介绍对比了这三种方法在理论和实践中的一些特点,并对未来的发展进行了展望.  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献